Skip to content
Product

Weather — Missing data

This table describes what happens when data is missing from a timestep in the weather file. A value is treated as missing if it is blank or not a number.

SunSolve Yield is designed so that missing data affects only the timestep it occurs in. A timestep that cannot be solved is flagged as an error row and contributes no energy, and the rest of the simulation continues. The number of error rows is shown on the Summary tab, and the affected timesteps and their messages can be viewed in the time-series output.

Missing parameterResponse when missing

Irradiances (GHI,, DNI & DHI), If the sun is above the height limit,, an error is reported for the timestep unless it contains the two irradiances required by the irradiance processing option. When the option is automatically determined,, any two of the three suffice. If the sun is below the height limit,, the timestep is treated as night with zero irradiance.

Ambient temperature, Error reported for the timestep.Wind speed, 0 m/s applied.

Wind direction, No effect unless Account for wind direction is selected in the thermal model. If it is selected,, provide wind direction for every timestep.

Atmospheric pressure,, ozone and AOD at 500 nm, Values set to the AM1.5g defaults (1013.25 mbar,, 0.3438 atm·cm and 0.084).

Far-field albedo, 20% applied.PWV, Relative humidity and ambient temperature used to calculate PWV.Both PWV and relative humidity, PWV set to AM1.5g default (1.4164 cm).

An atmospheric parameter override takes precedence over both the weather file and these defaults.